Exam
ple 3
S4 "\FTP\PutData3.bin"
Settings
Destination file name: \FTP\PutData3.bin
Automatic addition position: Automatic additional data is not added to the file name.
■
Operand [S4] setting (when getting device)
Setting
item
Settings
S4
Source File
Name
Specify the starting address of the device area that stores the string data that
indicates a source file name, or a character constant.
(Note 1) Specify a folder name and file name with its relative path from the home directory of the user who logs
in to the FTP server.
■
Flag operations
Name Description
SR7
SR8
(ER)
Set when a value outside the range is specified for the parameter.
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
To be set when transfer setting numbers are not specified in ascending order.
Set when executed in an interrupt program.
Set when the number of characters for operand specifying character constant exceeds 256.
To be set when an FTP server that has not been specified with the destination server setting
instruction or the tool software is specified.
CY
(SR9)
To be set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(Note 1) For details of the error codes stored in the system data SD29, refer to "20.2 List of System Data
Registers".
17.12 FTPcSET (FTP Client Transfer Setting)
17-68 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
