EasyManuals Logo

Panasonic FP7 Series Command Reference Manual

Panasonic FP7 Series
1222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #971 background imageLoading...
Page #971 background image
It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting
item
Settings
S1
HTTP server
number
(Essential)
Specify HTTP servers.
Specify the following keywords.
SV0: Server 0, SV1: Server 1, SV2: Server 2, SV3: Server 3
IP address or
host name of
HTTP server
(Essential)
Specify IP address or host name.
For an IP address, specify the keyword "IPv4=" or "IPv6=" at the beginning. For
a host name, specify "HOST=".
For IPv4
IPv4=111.122.133.144
For IPv6
IPv6=1111:122:2:1555:0:0:1888
* For details of the range of IPv4 addresses that can be specified, refer to
"19.10 Ethernet Function: IP Addresses" "IP address setting specifications".
For a host name:
HOST=HTTP.pidsx.com
Port No.
(Can be
omitted)
Specify port number. Port No. Range: 1 to 65535
PORT=: Port number (Default: 80)
SSL3/TLS1
Authentication
(Can be
omitted)
Specify whether or not to use SSL3/TLS1 authentication.
SSL: Use SSL3/TLS1
NON: Not use (Default: Not use)
(Note 1) Input an HTTP server number, the IP address or host name of an HTTP server, a port number, and the
SSL3/TLS1 authentication setting separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the parameters for specifying servers in the order of the above table.
Setting example
Exam
ple 1
S1 "SV0,IPv4=192.255.2.10,PORT=80,SSL"
Settings
HTTP server number: 0, IP address: 192.255.2.10, Port number: 80, SSL3/TLS1 authentication:
Use
Exam
ple 2
S1 "SV1,IPv6=1111:1222::1555:0:0:1888,PORT=8080,SSL"
Settings
HTTP server number: 1, IP address: 1111:1222::1555:0:0:1888, Port number: 8080, SSL3/TLS1
authentication: Use
Exam
ple 3
S1 "SV2,HOST=HTTP.pidsx.com,PORT=80,NON"
Settings
HTTP server number: 2, Hos name: HTTP.pidsx.com, Port number: 80, SSL3/TLS1
authentication: Not use
Operand [S2] setting
Specify the starting address of the device area that stores the login setting parameter, or a
character constant.
17.16 HTTPcSV (HTTP Client Connected Server Setting)
WUME-FP7CPUPGR-12 17-83

Table of Contents

Other manuals for Panasonic FP7 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic FP7 Series and is the answer not in the manual?

Panasonic FP7 Series Specifications

General IconGeneral
BrandPanasonic
ModelFP7 Series
CategoryController
LanguageEnglish

Related product manuals