Panasonic FP7 Series Command Reference Manual

● A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● When "NOUSE" or "KEEP" is specified instead of parameters, the instruction operates
according to the table of special keywords.
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting item Settings
Setting
range
S2
SMTP
authentication
method
(Essential)
Specify SMTP authentication method.
CRAM: CRAM-MD5 is used.
PLAIN1: PLAIN1 (ID/PASS) is used.
PLAIN2: PLAIN2 (ID/PASS) is used.
LOGIN: LOGIN is used.
Account
(Can be omitted)
Specify an account.
ACCOUNT=XXX (Default: root)
Maximum 32
one-byte
characters
Password
(Can be omitted)
Specify a password.
Specify the keyword “PASS=” at the beginning.
PASS=XXX (Default: root)
Maximum 32
one-byte
characters
(Note 1) Input an SMTP authentication method, an account, and a password separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the authentication setting parameters in the order of the above table.
Setting example
Exam
ple 1
S2 "CRAM,ACCOUNT=sunx,PASS=control"
Settings SMTP authentication method: CRAM-MD5, Account: sunx, Password: control
Exam
ple 2
S2 "PLAIN2,ACCOUNT=FP0R,PASS=small"
Settings SMTP authentication method: PLAIN2, Account: FP0R, Password: small
Exam
ple 3
S2 "LOGIN,ACCOUNT=FP2SH,PASS=middle"
Settings SMTP authentication method: LOGIN, Account: FP2SH, Password: middle
■
Operand [S2]: account name and password setting
Patterns How to specify
Account is specified. : Password is deleted. "CRAM,ACCOUNT=xxx,PASS="
Account is deleted. : Password is specified. "PLAIN1,ACCOUNT=,PASS=xxx"
Account is deleted. : Password is deleted. "PLAIN2,ACCOUNT=,PASS="
Account is specified. : Password is not changed. "LOGIN,ACCOUNT=xxx"
Account is not changed. : Password is specified. "CRAM,,PASS=xxx"
17.22 SMTPcSV (Mail Server Setting)
WUME-FP7CPUPGR-12 17-111

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English