Renault Duster 2007 - Fault Finding - Conformity Check

82D-23
V1
MR-453-X79-82D000$090.mif
82D
UCH
Vdiag No.: 09
SUB-FUNCTION: STARTING
NOTES
Only check conformity after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
Function
Parameter or Status
Checked or Action
Display and notes Fault finding
Supply ET004:
+ 12 V after
ignition feed
YES
In the event of a fault,
consult the interpretation of
status ET004 (see 87B,
Passenger compartment
connection unit).
Engine
immobiliser
ET184: Valid key code
YES when the ignition is
switched on
In the event of a fault,
apply the interpretation of
status ET184.
ET185:
Key code
received
YES when the ignition is
switched on
In the event of a fault,
apply the interpretation
of status ET185.
ET549: Immobiliser active NO
In the event of a fault,
apply the interpretation of
status ET549.
ET127:
Immobiliser
warning light
OFF
In the event of a fault,
apply the interpretation of
status ET127 (see 87B,
Passenger compartment
connection unit).
Key PR056:
Number of keys
allocated
2 keys on leaving the
factory and programming of
up to 4 keys in After-Sales
In the event of a fault,
apply the interpretation of
parameter PR056.
Engine
immobiliser
AC003:
Immobiliser
warning light
This command is used to
illuminate the immobiliser
warning light
In the event of a fault,
apply the procedure for
command AC003
(see 87B, Passenger
compartment
connection unit).
UCH_V09_CCONF
ACCESS – SAFETY
Fault finding – Conformity check