57A-10
INTERIOR EQUIPMENT
Centre console: Removal - Refitting
57A
REMOVAL
REMOVAL OPERATION
a Remove the adjustment control for the door mirrors
(1) .
a Disconnect the adjustment control connector for the
door mirrors.
a Unclip the front section of the gear lever gaiter (2)
using the tool (Car. 1363).
a Unclip the upper section of the centre console (3) .
a Unclip the switch mounting front panel (4) .
Special tooling required
Car. 1363 Set of trim removal levers.
2 ELECTRICALLY ADJUSTABLE EXTERNAL
REAR VIEW MIRRORS
144830
144829
144831
To Next Page
Loading...
