81A-4
REAR LIGHTING
3rd brake light: Removal - Refitting
81A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the high level brake light cover by pressing at
(1) .
a Disconnect the high level brake light connector (2) .
a Remove:
-the high level brake light screws (3) ,
-the high level brake light ,
-the high level brake light bulb (see 81A, Rear light-
ing, High level brake light bulb: Removal - Refit-
ting, page 81A-5) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
a Refit:
-the high level brake light bulb (see 81A, Rear light-
ing, High level brake light bulb: Removal - Refit-
ting, page 81A-5) ,
- the high level brake light ,
- the high level brake light screws.
a Connect the high level brake light connector.
a Clip on the high level brake light cover.
125456
125457