Renault Duster 2007 - Clutch; Clutch: Precautions for the Repair

20A-1
CLUTCH
Clutch: Precautions for the repair
20A
Before removing the clutch, check:
- The direction of fitting for the clutch plate.
Before refitting the clutch, check:
- The flywheel friction track (no scratches or blue
stains),
- The crankshaft bearing (no sticking),
- The engine and gearbox seals (replace if necessary),
- The sliding action of the clutch plate on the output
shaft,
- The guide of the thrust bearing and clutch fork (no
wear or scratches).
During refitting:
Check the direction of the clutch plate.
Centre the clutch plate using theor.
Gradually torque tighten the clutch pressure plate
bolts.
After refitting, check:
- The clutch play (for a cable operated vehicle),
- Bleeding of the hydraulic circuit (for vehicles with hy-
draulic controls).
WARNING
To prevent the clutch from juddering or slipping, do
not grease the output shaft or the clutch plate hub.