82D-40
AFTER REPAIR Carry out a complete check with the diagnostic tool.
V1
MR-453-X79-82D000$170.mif
ACCESS – SAFETY
Fault finding – Fault location chart
82D
UCH
Vdiag No.: 09
ALP 9
CONTINUED 1
Is the immobiliser warning light
illuminated CONTINUOUSLY?
Does the warning light flash?
Normally Rapidly
The UCH has not detected
the after ignition feed.
Carry out a test using the
diagnostic tool and deal
with status ET185 Key
code received.
See 87B, Passenger compartment
connection unit.
Carry out a test using the
diagnostic tool and deal with
status ET004 + 12 V after
ignition.
A
NO
YES
To Next Page
Loading...
