82D-39
AFTER REPAIR Carry out a complete check with the diagnostic tool.
V1
MR-453-X79-82D000$170.mif
82D
UCH
Vdiag No.: 09
ALP 9 The vehicle will not start
NOTES
Only refer to the customer complaints after performing a complete check using
the diagnostic tool.
Use the Wiring Diagrams Technical Note for DUSTER.
Switch on the ignition. Has the immobiliser
warning light gone out?
Turn the starter.
Nothing happens.
The starter clicks
but the engine
does not turn over.
The starter motor
turns but there is no
engagement.
The engine turns
but does not start.
The engine turns
over progressively
more slowly and
does not start.
Perform an
injection domain
test using the
diagnostic tool.
See 13B, Diesel
Injection or 17B,
Petrol Injection.
Check the battery
voltage. Check the
condition of the
starter.
NO
A
YES
B C D
UCH_V09_ALP9
ACCESS – SAFETY
Fault finding – Fault location chart
To Next Page
Loading...
