82D-27
AFTER REPAIR
Carry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
V1
MR-453-X79-82D000$110.mif
82D
UCH
Vdiag No.: 09
ET184
KEY CODE VALID
NOTES
The status is YES when the ignition is switched on (+ after ignition feed) using a key
for the vehicle.
If the state remains NO, try another key assigned to the vehicle before performing
any operation.
ET184: NO despite the ignition being switched on, a key that belongs to the vehicle and the key code
received (ET185 YES).
Check that status ET004 + 12 V After ignition feed is YES with the ignition on.
Re-allocate the keys with the After-Sales code using the scenario SC015 Key allocation.
If the fault persists, replace the faulty vehicle key.
UCH_V09_ET184
ACCESS – SAFETY
Fault finding – Interpretation of statuses
To Next Page
Loading...
