30A-6
GENERAL INFORMATION
Brake circuit: Tightening torque
30A
I - FRONT AND REAR BRAKES
II - BRAKE CONTROL
Description Tightening
torque
(N.m)
Front calliper bleed screw 6
Rear cylinder bleed screw 6
Front calliper inlet brake hose 17
Rear cylinder inlet brake pipes 14
Brake hose on brake pipe 14
Front brake guide pin bolt 34
Brake pipe on compensator 14
Brake pipe on master cylinder 14
Brake pipe on hose 14
Disc bolt 14
Cylinder bolt on brake back-plate 14
Description Tightening
torque
(N.m)
Calliper support bolt 107
Description Tightening
torque
(N.m)
Brake servo nut 21
Master cylinder nuts 21
Master cylinder outlet pipe 14
Hydraulic unit bolt on its mounting 8
Hydraulic unit pipe unions 14
Parking brake lever nuts 21
Hydraulic unit mounting bolt on
body
21
Compensator bolt 12