81A-5
REAR LIGHTING
High level brake light bulb: Removal - Refitting
81A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Unclip the high level brake light cover by pressing at
(1) .
a Disconnect the high level brake light connector.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
-the bulb holder (2) by turning it clockwise,
-the high level brake light bulb (3) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-the high level brake light bulb,
-the bulb holder by turning it anti-clockwise.
II - FINAL OPERATION.
a Connect the high level brake light connector.
a Clip on the high level brake light cover.
125456
125457