51A-15
SIDE OPENING ELEMENT MECHANISMS
Rear side door lock: Removal - Refitting
51A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove:
-the rear side door trim (see Rear side door trim:
Removal - Refitting) (72A, Side opening element
trim),
-the support of the rear side door run channel (see
51A, Side opening element mechanisms, Front
side door slide mounting: Removal - Refitting,
page 51A-21) .
II - REMOVAL OPERATION
a Unclip the exterior opening control linkage (1) from
the clip (2) on the exterior door handle.
a Unclip:
- the control linkages at (3) ,
- the control linkage support (4) ,
a Remove the bolts (5) from the rear side door lock.
a Disconnect the connector (6) from the rear side door
lock.
a Remove the "rear side door lock - control linkages"
assembly.
145251
107962
DOOR OPENING SYSTEM 02
145579