Renault Duster 2007 - Hydraulic Unit - Front Right-Hand Calliper Brake Pipe: Removal - Refitting

31A-25
FRONT AXLE COMPONENTS
Hydraulic unit - front right-hand calliper brake pipe: Removal - Refitting
ANTI-LOCK BRAKING SYSTEM
31A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment.
a Fit a pedal press in order to limit the outflow of
brake fluid.
a Remove:
-the front right-hand wheel (see 35A, Wheels and
tyres, Wheel: Removal - Refitting, page 35A-1) ,
-the front engine cover (if fitted to the vehicle).
a Remove the soundproofing clips (1) (if fitted to the
vehicle).
a Move the soundproofing to one side in order to see
the pipes.
II - REMOVAL OPERATION
a Undo the brake pipe union (2) on the brake hose.
a Remove the brake pipe from the retaining bracket.
a Detach the brake pipe.
Equipment required
pedal press
Tightening torquesm
brake pipe union on the
hydraulic unit
14 N.m
brake pipe union on the
brake hose
14 N.m
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see 31A, Front axle components, Front
axle components: Precautions for the repair,
page 31A-1) .
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
117827
145615