Renault Duster 2007 - Manual Gearbox: Removal - Refitting

21A-4
MANUAL GEARBOX
Manual gearbox: Removal - Refitting
K9K, and JR5
21A
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
Special tooling required
Mot. 1453 Engine anchorage support
with multiple adjustments and
retaining straps.
Equipment required
component jack
Tightening torquesm
stud on the engine 8 N.m
stud on the gearbox 8 N.m
gearbox stud nuts 44 N.m
upper and lower gear-
box bolts
44 N.m
power-assisted steering
pipe bolt on the sub-
frame
21 N.m
power-assisted steering
pipe bolt on the gear-
box mounting
21 N.m
power-assisted steering
pipe bolt on the gearbox
21 N.m
earth strap bolts on the
gearbox
21 N.m
expansion bottle nuts 8 N.m
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair:
- (see Manual gearbox: Precautions for the
repair) ,
- (see Vehicle: Precautions for the repair) .
IMPORTANT
To prevent the vehicle from falling, lash it to the
vehicle lift using a strap.