21A-5
MANUAL GEARBOX
Manual gearbox: Removal - Refitting
K9K, and JR5
21A
a Remove:
-the battery (see Battery: Removal - Refitting)
(80A, Battery),
-the battery tray,
-the earth strap nut (1) ,
-the injection computer (see Diesel injection com-
puter: Removal - Refitting) (13B, Diesel injec-
tion),
-the wiring mounting on the injection computer sup-
port.
a Move the engine harness aside.
a Disconnect:
-the pre-postheating unit connector (2) ,
-the vehicle speed sensor connector.
a Remove:
-the vehicle speed sensor protective cover,
-the expansion bottle nuts.
a Move aside the expansion bottle from its support.
a Remove:
-the clip (3) on the air pipe between the turbocharg-
er and the intercooler,
- the air pipe nut (4) on the gearbox,
- the air pipe clip on the intercooler,
- the air pipe between the turbocharger and the inter-
cooler.
a Remove the wiring mountings on the gearbox.
a Move away the engine wiring around the gearbox.
a Remove:
- the crankshaft position sensor (see Crankshaft
position sensor: Removal - Refitting) (13B,
Petrol injection),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres).
24730 24828