13C-3
PREHEATING
Heater plugs: Removal - Refitting
K9K
13C
a Unscrew the heater plugs using a 10 mm long sock-
et connected to a universal joint or a hinged wrench
for heater plug.
a Use a hose to unscrew the heater plugs completely.
a Remove the heater plugs.
REFITTING
I - REFITTING OPERATION
a Without tightening, fit the heater plugs using the
hose.
a Torque tighten the heater plugs (15 N.m).
a Connect the connector for each heater plug.
II - FINAL OPERATION
a Refit the engine cover.
To Next Page
Loading...
