Renault Duster 2007 - Page 260

14A-3
ANTIPOLLUTION
Fuel vapour absorber: Removal - Refitting
K4M
14A
REFITTING
I - REFITTING PREPARATION OPERATION
a Remove the blanking plugs.
II - REFITTING OPERATION
a Refit:
-the fuel vapour absorber,
-the fuel vapour absorber nuts.
a Clip on the breather pipe (2)
a Connect:
-the solenoid valve connector,
-the fuel vapour absorber pipes (1) .
III - FINAL OPERATION
a Fit the front section of the front right-hand wheel
arch liner.
a Refit the front right-hand wheel (see Wheel: Re-
moval - Refitting) (35A, Wheels and tyres).