19A-18
COOLING
Coolant pump: Removal - Refitting
K4M
19A
II - REFITTING OPERATION
a Apply one to two drops of FRENETANCHE (see
Vehicle: Parts and consumables for the repair)
(04B, Consumables - Products) to the coolant pump
bolts (1) and (4) .
a Refit the coolant pump.
a Fit the coolant pump bolts in order until contact is
made.
a Torque tighten in order:
-the coolant pump M8 bolt (27 N.m) (1) .
-the coolant pump M6 bolts (10 N.m) (2) to (8) .
III - FINAL OPERATION
a Refit:
-the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-17) ,
-the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-2) ,
-the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres).
a Fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-6) .
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-6) .
14505
To Next Page
Loading...
