Renault Duster 2007 - Page 322

19A-21
COOLING
Thermostat: Removal - Refitting
K4M
19A
-the thermostat cover.
a Remove:
-the thermostat (4) ,
-the thermostat seal (5) .
REFITTING
I - REFITTING PREPARATION OPERATION
a Use SURFACE CLEANER (see Vehicle: Parts
and consumables for the repair) (04B, Consum-
ables - Products) to clean and degrease the thermo-
stat housing.
a The thermostat seal must be replaced.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-a new seal on the thermostat,
-the thermostat,
-the thermostat cover.
a Connect the following to the thermostat cover:
-the expansion bottle hose,
-the cooling radiator top hose.
a Using the (Mot. 1448) ororfit:
-the expansion bottle hose clip,
-the cooling radiator top hose clip.
III - FINAL OPERATION
a Fill and bleed the cooling system (see 19A, Cool-
ing, Cooling system: Draining - Refilling, page
19A-6) .
a Refit:
- the engine undertray,
- the air resonator (see 12A, Fuel mixture, Air res-
onator: Removal - Refitting, page 12A-2) .
123733