Renault Duster 2007 - Page 327

19A-26
COOLING
Water chamber: Removal - Refitting
K4M
19A
a Screw on the water chamber bolts without tightening
them.
a Torque tighten in order:
-the coolant outlet unit bolts (initial torque) (4
N.m),
-the water chamber bolts (12 N.m).
III - FINAL OPERATION
a Connect:
-the coolant temperature sensor,
-the expansion bottle hose,
-the passenger compartment heater hose,
-the top hose to the water chamber.
a Refit the air resonator (see 12A, Fuel mixture, Air
resonator: Removal - Refitting, page 12A-2) .
a Fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-6) .
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-6) .
116636