19A-37
COOLING
Coolant pump inlet pipe: Removal - Refitting
K4M
19A
a Refit the injector rail protector.
a Fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-6) .
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-6) .
To Next Page
Loading...
