30A-3
GENERAL INFORMATION
Brake circuit: Precautions for the repair
30A
Parts identification:
- shape of steel or copper pipe end piece (A),
- shape of connecting points on components (B),
- shape of unions (C): 11 mm hexagonal.
Precautions to be taken before and during the brake
circuit bleeding operation:
- use brake fluid which conforms to the Renault stan-
dard (see Vehicle: Parts and consumables for the
repair) (04B, Consumables - Products),
- check the brake fluid levels in the brake circuit and the
bleeding device,
- the braking regulation circuit must be free from all hy-
draulic and electrical faults,
- check that the pressure of the bleeding device is be-
tween 1.5 bars and 2 bars.
78491
To Next Page
Loading...
