31A-10
FRONT AXLE COMPONENTS
Front brake calliper: Repair
31A
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-the new rectangular section seal in the calliper
groove,
-the piston (after having smeared it with the grease
supplied in the repair kit) using the,
-the dust seal.
II - FINAL OPERATION.
a Refit:
-the brake calliper (see 31A, Front axle compo-
nents, Front brake calliper: Removal - Refitting,
page 31A-7) ,
-the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Remove the pedal press.
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
IMPORTANT
To avoid any accident, bring the pistons, brake
pads and brake discs into contact by depressing
the brake pad several times.
To Next Page
Loading...
