36A-3
STEERING ASSEMBLY
Steering: Precautions for the repair
36A
The axial ball joint limiters (1) are colour coded for fool-
proofing purposes. When removing or replacing the ax-
ial ball joint, check that the limiter with the correct
colour code is refitted.
6 - Power-assisted steering pump
Do not run the engine without steering fluid in the cir-
cuit.
7 - Pump assembly
Do not run the engine without steering fluid in the cir-
cuit.
8 - Wiring harnesses
Ensure that the electrical wiring is clean and correctly
routed.
To Next Page
Loading...
