36A-8
STEERING ASSEMBLY
Steering column: Removal - Refitting
36A
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the ignition switch (see Ignition switch: Re-
moval - Refitting) . (82A, Immobiliser).
a Refit a new cam nut for the universal joint on the
steering column
a Lock the cam nut in its housing (opening on the uni-
versal joint).
a Refit:
-the steering column,
-the universal joint bolt,
-the bolts on the steering column.
a Torque tighten:
-the universal joint bolt (21 N.m),
-the steering column nuts (21 N.m).
III - FINAL OPERATION
a Refit:
-the dashboard (see Dashboard: Removal - Refit-
ting) (57A, Interior equipment).
-the radio (see Radio: Removal - Refitting) (86A,
Radio),
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (83A, Instrument panel),
-the steering column switch assembly (see Steer-
ing column switch assembly: Removal - Refit-
ting) (84A, Control - Signals),
-the steering wheel (see 36A, Steering assembly,
Steering wheel: Removal - Refitting, page 36A-
13) ,
-the driver's front airbag (see Driver's frontal air-
bag: Removal - Refitting) (88C, Airbags and seat
belt pretensioners),
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Unlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbag and pre-
tensioners).
To Next Page
Loading...
