36A-14
STEERING ASSEMBLY
Steering wheel: Removal - Refitting
36A
II - REFITTING OPERATION FOR PART
CONCERNED
a
a Refit the steering wheel.
a Connect the connectors.
a Refit the new steering wheel bolt.
a Torque tighten the new steering wheel bolt (44
N.m).
III - FINAL OPERATION
a Refit the driver's front airbag (see Driver's frontal
airbag: Removal - Refitting) .
IV - CHECKING AFTER REPAIR
a Switch on the ignition.
a Check the operation of the rotary switch:
-turn the steering wheel to the left until it stops,
-turn the steering wheel to the right until it stops,
-check that there are no faults on the instrument
panel.
105327
WARNING
In order not to damage the steering wheel or
steering column, the steering wheel-column fool-
proofing devices must be aligned.
To Next Page
Loading...
