51A-11
SIDE OPENING ELEMENT MECHANISMS
Front side door electric window mechanism: Removal - Refitting
51A
REFITTING
I - REFITTING OPERATION
a Refit the window lift mechanism.
a Connect the electric window motor connector.
a Refit the nuts (2) .
a Position the sliding window.
a Refit the bolts (1) without tightening them.
a Raise the window.
a Tighten the bolts (1) through the holes (3) .
II - FINAL OPERATION
a Carry out a function test.
a Refit the front side door trim (see Front side door
trim: Removal - Refitting) (72A, Side opening ele-
ments trim).
109136
To Next Page
Loading...
