54A-2
WINDOWS
Windscreen: Removal - Refitting
54A
a Fit the toolon the dashboard.
II - REMOVAL OPERATION
a Cut the cement bead (see Technical Note 0560A).
a Remove the windscreen (this operation requires two
people).
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Windscreen adjust-
ing shim
a Fit new shims and retaining stops.
a For preparation and bonding, (see Technical Note
0560A).
II - REFITTING OPERATION
a Bond the windscreen (this operation requires two
people).
a Respect the following clearances and flush fitting:
- « windscreen - roof »
- « windscreen - windscreen pillar »
a Stick on strips of masking tape (6) to hold the wind-
screen in position while the cement is drying.
a Proceed in the reverse order to removal.
H79
108666
To Next Page
Loading...
