61A-12
HEATING
Recirculation control cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
a Unclip the cable sleeve stop (5) from the distribution
unit.
a Extract the end of the air recirculation control cable
(6) .
a Remove the air recirculation control cable.
REFITTING
a Proceed in the reverse order to removal.
a Check that the air recirculation flap is in the recircu-
lation position.
a Check that the recirculation control can move along
its whole stroke.
a Unlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
121597
To Next Page
Loading...
