61A-14
HEATING
Air distribution cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
a Unclip the cable sleeve stop (5) from the distribution
unit.
a Extract the end of the air distribution cable (6) .
a Remove the air distribution cable.
REFITTING
a Proceed in the reverse order to removal.
a Check that the air distribution control can move
along its whole stroke.
a Unlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
LEFT-HAND DRIVE
108093
To Next Page
Loading...
