62C-32
V1
MR-453-X79-62C000$060.mif
CLIMATE CONTROL
Fault finding – Conformity check
62C
SUB-FUNCTION: USER SELECTION
NOTES
Only carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine at idle speed, AIR CONDITIONING OPERATING
(air conditioning compressor engaged).
Computer
Parameter or
Status Checked
or Action
Display and notes Fault finding
UCH
ET547: Rear de-
icing button
PRESSED / RELEASED
In the event of a fault, refer to the
interpretation of this status.
To Next Page
Loading...
