62C-64
AFTER REPAIR Carry out a full check with the diagnostic tool.
V1
MR-453-X79-62C000$080.mif
CLIMATE CONTROL
Fault finding – Fault finding chart
62C
ALP 10 Inefficient rear screen de-icing and demisting
NOTES
Carry out this conformity check after a complete check using the diagnostic tool
(fault reading, especially UCH and injection faults and configuration checks).
Check that the fuses are in good condition.
Use a multimeter and a 21 W test light.
Use the Technical Note Wiring Diagram for DUSTER.
Special notes:
Check that the inside of the glass is not greasy as this lowers the de-icing efficiency.
Note:
The de-icing control is only authorised when the engine is running to save power.
The heated rear screen is controlled by pressing the heated rear screen button
(with time delay and door mirror de-icer if fitted).
To Next Page
Loading...
