RFL 9300 RFL Electronics Inc.
August 9, 2001 4 - 9 (973) 334-3100
4.2.11 PH TOC - PHASE INVERSE TIME OVERCURRENT ENABLE/DISABLE
Parameter #30 (PH TOC) controls the RFL 9300’s phase inverse time overcurrent backup func-
tion. This function can be enabled using parameter #30 only if the operator enables backup
mode operation (parameter #27). See paragraph 6.7 for more information.
4.2.12 P PICKUP - PHASE INVERSE TIME OVERCURRENT PICKUP VALUE
Parameter #31 (P PICKUP) controls the RFL 9300’s phase inverse time overcurrent pickup
value. See paragraph 6.7 for more information.
4.2.13 PH CURVE - PHASE INVERSE TIME OVERCURRENT CURVE SELECT
Parameter #32 (PH CURVE) controls the RFL 9300’s phase inverse time overcurrent curve se-
lect. See paragraph 6.7 for more information.
4.2.14 PH DIAL - PHASE INVERSE TIME OVERCURRENT DIAL SETTING
Parameter #33 (PH DIAL) controls the RFL 9300’s phase inverse time overcurrent dial setting. See
paragraph 6.7 for more information.
4.2.15 GND TOC - GROUND INVERSE TIME OVERCURRENT ENABLE/DISABLE
Parameter #34 (GND TOC) controls the RFL 9300’s ground inverse time overcurrent backup
function. This function can be enabled using parameter #34 only if the operator enables backup
mode operation (parameter #27). See paragraph 6.7 for more information.
4.2.16 G PICKUP - GROUND INVERSE TIME OVERCURRENT PICKUP VALUE
Parameter #35 (G PICKUP) controls the RFL 9300’s ground inverse time overcurrent pickup
value. See paragraph 6.7 for more information.
4.2.17 G CURVE - GROUND INVERSE TIME OVERCURRENT CURVE SELECT
Parameter #36 (G CURVE) controls the RFL 9300’s ground inverse time overcurrent curve se-
lect. See paragraph 6.7 for more information.
4.2.18 GND DIAL - GROUND INVERSE TIME OVERCURRENT DIAL SETTING
Parameter #37 (GND DIAL) controls the RFL 9300’s ground inverse time overcurrent dial setting.
See paragraph 6.7 for more information.
To Next Page
Loading...