SP2-xxx Drum
SM Appendix 2-55 D093/D094
Appendix:
SP Mode
Tables
2916 Fine Magnification
Adjusts the magnification for each paper type. These settings are enabled
automatically for the paper type when the operator selects a magnification ratio
for the copy job. These corrections are done during image processing after the
original is scanned. Adjust the setting for a paper type if you consistently notice
distortion in magnified images for a particular type.
[-10 to +10/0/0.1%]
Notes
SP2916-1, SP2916-2 should be adjusted at installation of the main
machine. In "1. Installation" see SP Adjustments.
1 Plain Paper: Mode1-4: Main Scan
2 Plain Paper: Mode1-4: Sub Scan
3 Translucent: Mode1-4: Main Scan
4 Translucent: Mode1-4: Sub Scan
5 Film: Mode1-4: Main Scan
6 Film: Mode1-4: Sub Scan
7 Recycled Paper: Mode1-4: Main Scan
8 Recycled Paper: Mode1-4: Sub Scan
9 Plain Paper: Mode5: Main Scan
10 Plain Paper: Mode5: Sub Scan
11 Translucent: Mode5: Main Scan
12 Translucent: Mode5: Sub Scan
13 Film: Mode5: Main Scan
14 Film: Mode5: Sub Scan
15 Recycled Paper: Mode5: Main Scan
16 Recycled Paper: Mode5: Sub Scan
To Next Page
Loading...
