SP5-xxx Mode
D093/D094 2-148 SM Appendix
5824
NVRAM Data Upload CTL
Uploads the UP and SP mode data (except for counters and the serial
number) from NVRAM on the control board to an SD card inserted in Slot 2.
Remove the SD card slot cover on the back of the machine.
Insert a blank SD card in Slot 2.
Open this SP and touch [EXECUTE].
When you see "Completed", remove the SD card from Slot 2.
5825
NVRAM Data Download CTL
Downloads the content of an SD card in Slot 2 to the NVRAM on the control
board.
Remove the SD card slot cover on the back of the machine.
Insert a blank SD card in Slot 2.
Open this SP and touch [EXECUTE].
When you see "Completed", remove the SD card from Slot 2.
5828 Network Setting CTL
50 1284 Compatibility (Centro)
Enables and disables bi-directional communication on the parallel connection
between the machine and a computer.
[0 to 1 / 1 / 1 ]
0:Off, 1: On
52 ECP (Centro)
Disables and enables the ECP feature (1284 Mode) for data transfer.
[0 to 1 / 1 / 1]
0: Disabled, 1: Enabled
To Next Page
Loading...
