Ricoh D093 - Page 671

SP5-xxx Mode
SM Appendix 2-149 D093/D094
Appendix:
SP Mode
Tables
65 Job Spool
Switches job spooling on and off.
[0 to 1/0/1]
0: No spooling 1: Spooling enabled
66 Job Spool Clear: Start Time
This SP determines whether the job interrupted at power off is resumed at the
next power on. This SP operates only when SP5828065 is set to 1.
[0 to 1/1/1]
1: Resumes printing spooled jog.
0: Clears spooled job.
69 Spooling (Protocol)
This SP 8etermines whether job spooling is enabled or disabled for each pro to
col. This is a 8-bit setting.
0 LPR 4 BMLinks (Japan Only)
1
FTP
(Not
Used)
5 DIPRINT
2 IPP 6 Reserved (Not Used)
3 SMB 7 Reserved (Not Used)
90 TELNET (0:OFF 1:ON)
Disables or enables Telnet operation. If this SP is disabled, the Telnet port is
closed.
[0 to 1/1/1]
0: Disable
1: Enable