Schweitzer Engineering Laboratories SEL-421-4 - Page 1075

9.11
Date Code 20171006 Instruction Manual SEL-400 Series Relays
Reporting
Oscillography
.CFG File
The .CFG file contains data such as sample rates, number of channels, line fre-
quency, channel information, and transformer ratios (see Figure ). A <CR><LF>
follows each line. If control inputs or control outputs are not available because of
board loading and configuration, the relay does not report these inputs and out-
puts in the analog and digital sections of the .CFG file.
Relay 1 Date: 02/02/2011 Time: 14:11:21.000
Station A Serial Number: 2010265004
Event: ABG T Location: 59.61 (mi) From: LOCAL FLM: TW Time Source: HIRIG
Event Number: 10121 Shot 1P: 0 Shot 3P: 0 Freq: 59.99 Group: 1
Targets:
Breaker 1: CLOSED
Breaker 2: OPEN
PreFault: IA IB IC IG 3I2 VA VB VC V1mem
MAG(A/kV) 200 200 200 1 1 133.946 133.938 133.941 133.935
ANG(DEG) -0.7 -120.5 119.4 -51.7 -88.7 0.0 -119.9 120.2 0.1
Fault:
MAG(A/kV) 2200 2200 2200 7 376 133.937 133.926 133.957 133.933
ANG(DEG) -0.7 -120.6 119.5 -102.0 -83.5 0.0 -119.9 120.2 0.1
87 Differential Currents
PreFault: IA IB IC IQ IG
MAG(pu) 0.00 0.00 0.00 0.00 0.00
ANG(DEG) 0.0 0.0 0.0 0.0 0.0
Fault:
MAG(pu) 0.00 0.00 0.00 0.00 0.00
ANG(DEG) 0.0 0.0 0.0 0.0 0.0
Summary Event
Information
SET_G1.TXT
[INFO]
RELAYTYPE=SEL-411L
FID=SEL-411L-X136-V0-Z001001-D20110114
BFID=SLBT-4XX-R205-V0-Z001002-D20100128
PARTNO=0411L0X6X1B6BCXH5C4E4XX
[IOBOARDS]
INT4_E, , , 24, 8, 0, 0, 1
CFSINT8, , , 8, 8, 0, 0, 2
[G1]
"SID","Station A"
"RID","Relay 1"
"NUMBK",2
"BID1","Breaker 1"
"BID2","Breaker 2"
"NFREQ",60
.
.
.
"AR197",
"AR198",
"AR199",
"AR200",
Relay Settings
Figure 9.5 Sample COMTRADE .HDR Header File
Station A,FID=SEL-411L-1-R100-V0-Z001001-D20110311,1999
Relay Information (1999 = COMTRADE Standard)
398,14A,384D
398 = sum of analogs and digitals
14A = total number of analog channels
384D = total number of digital points
a
1,IAW,A,,A,0.324059,0,0,-32767,32767,200.0,1,P
2,IBW,B,,A,0.324059,0,0,-32767,32767,200.0,1,P
3,ICW,C,,A,0.324059,0,0,-32767,32767,200.0,1,P
4,IAX,A,,A,0.324059,0,0,-32767,32767,200.0,1,P
5,IBX,B,,A,0.324059,0,0,-32767,32767,200.0,1,P
6,ICX,C,,A,0.324059,0,0,-32767,32767,200.0,1,P
7,VAY,A,,kV,0.032406,0,0,-32767,32767,2000.0,1,P
8,VBY,B,,kV,0.032406,0,0,-32767,32767,2000.0,1,P
9,VCY,C,,kV,0.032406,0,0,-32767,32767,2000.0,1,P
10,VAZ,A,,kV,0.032406,0,0,-32767,32767,2000.0,1,P
11,VBZ,B,,kV,0.032406,0,0,-32767,32767,2000.0,1,P
12,VCZ,C,,kV,0.032406,0,0,-32767,32767,2000.0,1,P
13,VDC1,,,V,0.011178,-0.000000,0,-32767,32767,1,1,P
14,VDC2,,,V,0.011178,-0.000000,0,-32767,32767,1,1,P
14 Analog Channels
COMTRADE .CFG Configuration File Data