14.18
SEL-400 Series Relays Instruction Manual Date Code 20171006
ASCII Command Reference
Command Description
CSER
The CSER command provides an SER report in Compressed ASCII format. The
default order of the CSER command (chronologically newest to oldest from list
top to list bottom) is the reverse of the SER command (oldest to newest from list
top to list bottom).
CSE
Use the CSE command to gather Sequential Events Recorder (SER) records. You
can sort these records in numerical or date order.
CPR date1 date2 Displays all the rows that were recorded on and
between (including) date1 and date2 (date1 chrono-
logically precedes date2), with the latest row at the
bottom and the oldest row at the top.
1, B, P, A, O, 2
CPR date2 date1 Displays all the rows that were recorded on and
between (including) date1 and date2 (date2 chrono-
logically precedes date1), with the latest row at the
bottom and the oldest row at the top.
1, B, P, A, O, 2
CPR TERSE The CPR TERSE command omits the report labels. 1, B, P, A, O, 2
Table 14.41 CPR Command (Sheet 2 of 2)
Command Description Access Level
Table 14.42 CSE Command
Command Description Access Level
CSE Return all records from the SER in Compressed ASCII
format, with the most recent (lowest number) at the
beginning of the list and the oldest (highest number) at
the end of the list.
1, B, P, A, O, 2
CSE k
a
a
Parameter
k
indicates a specific number of SER records.
Return the k most recent records from the SER in Com-
pressed ASCII format, with the most recent (lowest
number) at the beginning of the list and the oldest (high-
est number) at the end of the list.
1, B, P, A, O, 2
CSE m n
b
b
Parameters
m
and
n
indicate an SER record number.
Return the SER records in Compressed ASCII format
from m to n.
If m is greater than n, then records appear with the oldest
(highest number) at the beginning of the list and the
most recent (lowest number) at the end of the list.
If m is less than n, then records appear with the most
recent (lowest number) at the beginning of the list and
the oldest (highest number) at the end of the list.
1, B, P, A, O, 2
CSE date1
c
c
Enter
date1
and
date2
in the same format as Global setting DATE_F.
Return the SER records in Compressed ASCII format on
date date1.
1, B, P, A, O, 2
CSE date1 date2
c
Return the SER records in Compressed ASCII format
from date date1 to date date2.
1, B, P, A, O, 2
To Next Page
Loading...
