● "LTYPE"
● "LAYER"
● "STYLE"
● "VIEW"
● "UCS"
● "VPORT"
● "APPID"
● "DIMSTYLE"
● "HEADER ($INSUNITS, $MEASUREMENT)"
● "TABLES"
● "BLOCKS"
● "ENTITIES"
6.11.2 Displaying CAD drawings
6.11.2.1 Open a DXF file
Procedure
1. Select the "Program Manager" operating area.
2. Choose the desired storage location and position the cursor on the DFX
file that you want to display.
3. Press the "Open" softkey.
The selected CAD drawing will be displayed with all its layers, i.e. with all
graphic levels.
4. Press the "Close" softkey to close the CAD drawing and to return to the
Program Manager.
6.11.2.2 Cleaning a DXF file
All contained layers are shown when a DXF file is opened.
Layers that do not contain any contour- or position-relevant data can be shown or hidden.
Machining the workpiece
6.11 Working with DXF files
Turning
Operating Manual, 06/2019, A5E44903486B AB 191
To Next Page
Loading...
