Procedure
1. Select the "Program manager" operating area.
2. Select the desired storage medium, i.e. a local or USB drive.
3. If you want to create a new directory in the local network, place the cursor
on the topmost folder and press the "New" and "Directory" softkeys.
The "New Directory" window opens.
4. Enter the desired directory name and press the "OK" softkey.
14.4.3 Creating a new workpiece
You can create various types of files such as main programs, initialization files, tool offsets, etc.
in a workpiece.
Note
Workpiece directories
You have the option of nesting tool directories. Please note that the length of the call line is
restricted. You will be informed if the maximum number of characters is reached when entering
the workpiece name.
Procedure
1. Select the "Program manager" operating area.
2. Select the required storage location.
3. Position the cursor on the folder in which you would like to create a
workpiece.
4. Press the "New" softkey.
The "New Workpiece" window appears.
5. If necessary, select a template if any are available.
Managing programs
14.4 Creating a directory / program / job list / program list
Turning
Operating Manual, 06/2019, A5E44903486B AB 787
To Next Page
Loading...
Need help?
General
