15.4 Sorting, alarms, faults and messages
If a large number of alarms, messages or alarm logs are displayed, you have the option of
sorting these in an ascending or descending order according to the following criteria:
● Date (alarm list, messages, alarm log)
● Number (alarm list, messages)
As a consequence, for every extensive lists, you can obtain the required information faster.
Procedure
1. Select the "Diagnostics" operating area.
...
2. Press the "Alarm list", "Messages" or "Alarm log" softkey to display the
requested messages and interrupts.
3. Press the "Sort" softkey.
The list of entries is sorted in descending order according to date, i.e. the
most recent information is at the beginning of the list.
4. Press the softkey "Ascending" to sort the list in the ascending order.
The most recent event is shown at the end of the list.
5. Press the "Number" softkey if you wish to sort the alarm list or the list with
messages according to numbers.
6. Press the "Descending" softkey to display the list in decreasing/descend‐
ing order again.
Alarm, error and system messages
15.4 Sorting, alarms, faults and messages
Turning
840 Operating Manual, 06/2019, A5E44903486B AB
To Next Page
Loading...
