Multitouch operation with SINUMERIK Operate
3
3.1 Multitouch panels
The "SINUMERIK Operate Generation 2" user interface has been optimized for multitouch
operation. You can execute all actions by touch and finger gestures. Using SINUMERIK
Operate is much quicker with touch operation and finger gestures.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
The following operator panel fronts, handheld devices and SINUMERIK control systems can be
operated with the "SINUMERIK Operate Generation 2" user interface:
● OP 015 black
● OP 019 black
● PPU 290.3
● HT 8
● SIMATIC ITC V3
● SIMATIC IFP
● SIMATIC panel IPC
Additional information
You can find more information on the topic of "user interface" at:
● SINUMERIK Operate Commissioning Manual (IM9), 840D sl
● SINUMERIK Operate Commissioning Manual (IH9), 828D
You can find additional information on multitouch panels at:
● Operating components - handheld devices, SINUMERIK 840 D sl (OP 015 black / 019 black)
● PPU and Components Manual, SINUMERIK 828D (PPU 290.3)
Turning
Operating Manual, 06/2019, A5E44903486B AB 71
To Next Page
Loading...
