10.6.3.1 Parameters
Parameter Description Unit
Machining
● ∇ (roughing)
● ∇∇ (semi-finishing)
● ∇∇∇ (finishing/speed)
● ∇∇∇∇ (fine finishing/precision)
● Deselection
Mold-making
function
● Advanced Surface
● Top Surface
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
Contour tolerance
● Input of the maximum allowance from the programmed contour.
● Standard default values depending on the type of machining via the "Default
values" softkey:
– ∇ (roughing): 0.100
– ∇∇ (semi-finishing): 0.050
– ∇∇∇ (finishing/speed): 0.010
– ∇∇∇∇ (fine finishing/precision): 0.005
Note
The default values may have been changed by the manufacturer.
Please observe the information provided by the machine manufacturer.
Smoothing (not
for "Advanced
Surface")
● Yes
Optimized path within the contour tolerance
● No
Path close to contour
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
Programming technology functions (cycles)
10.6 Further cycles and functions
Turning
620 Operating Manual, 06/2019, A5E44903486B AB
To Next Page
Loading...
Need help?
General
