Editing end customer data
4. You have the option of changing the address data of the end customer
using the "Change" softkey.
- OR -
Using the "Clear" softkey, you can delete all logbook entries.
All entries, except the date of the first commissioning, are deleted. Soft‐
key "Clear" is deactivated.
Note
Deleting logbook entries
As soon as the 2nd commissioning has been completed, the "Clear" softkey to delete the
logbook data is no longer available.
15.8.2 Making a logbook entry
Using the "New logbook entry" window to make a new entry into the logbook.
Enter your name, company and department and a brief description of the measure taken or a
description of the fault.
Note
Setting line breaks
If you wish to make line breaks in the "Fault diagnostics/measure" field, use the key
combination <ALT> + <INPUT>.
The date and entry number are automatically added.
Sorting the entries
The logbook entries are displayed numbered in the "machine logbook" window.
More recent entries are always added at the top in the display.
Procedure
1. The logbook is opened.
2. Press the "New entry" softkey.
The "New logbook entry" window opens.
3. Enter the required data and press the "OK" softkey.
You return to the "Machine logbook" window and the entry is displayed
below the machine identity data.
Alarm, error and system messages
15.8 Logbook
Turning
850 Operating Manual, 06/2019, A5E44903486B AB
To Next Page
Loading...
Need help?
General
