Note
Deleting logbook entries
Up to the completion of the 2nd commissioning, you have the option to delete the logbook
entries up to the time of the first commissioning using the "Clear" softkey.
Searching for a logbook entry
You have the option for searching for specific entries using the search function.
1. The "Machine logbook" window is opened.
2. Press the "Find" softkey.
3. Enter the desired term in the search form. You can make a search ac‐
cording to date/time, company name/department or according to fault
diagnostics/measure.
The cursor is positioned on the first entry that corresponds to the search
term.
4. Press the "Continue search" softkey if the entry found is not the one that
you are looking for.
Additional search option
Press the "Go to Beginning" softkey to start the search at the latest entry.
Press the "Go to End" softkey to start the search at the oldest entry.
Alarm, error and system messages
15.8 Logbook
Turning
Operating Manual, 06/2019, A5E44903486B AB 851
To Next Page
Loading...
Need help?
General
