Parameter Description Unit
ZD - (only for ∇ machining)
- (only for blank description, cylinder and allowance)
● For blank description, cylinder
– Version, absolute:
Cylinder dimension (abs)
– Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
● For blank description, allowance
– Allowance on the CYCLE62 finished part contour (inc)
mm
Allowance Allowance for pre-finishing - (only for ∇∇∇)
● Yes
U1 contour allowance
● No
U1 Compensation allowance in X and Z direction (inc) – (only for allowance)
● Positive value: Compensation allowance is kept
● Negative value: Compensation allowance is removed in addition to finishing
allowance
mm
Relief cuts Machine relief cuts (cannot be changed)
FR Insertion feedrate, relief cuts
* Unit of feedrate as programmed before the cycle call
Hidden parameters
Parameter Description Value Can be set in SD
PL (only for G code) Machining plane Defined in MD
52005
Residual material With subsequent residual material removal No
SC (only for G
code)
Safety clearance x
Selection Always round on the contour
Uniform cut segmentation
Constant cutting depth
DI Continuous cut - (only for ∇) 0
Set machining area
limits
Set machining area limits No
Relief cuts Machine relief cuts (grayed out) Yes
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Programming technology functions (cycles)
10.3 Contour turning
Turning
464 Operating Manual, 06/2019, A5E44903486B AB
To Next Page
Loading...
Need help?
General
