① Synchronization step
② Counter-spindle step
The following counter-spindle steps, which implicitly contain WAIT marks, are identified using
a symbol:
● Pulling (take zero point = yes)
● Machining side
● Complete transfer
● Synchronizing
Parameters Description Unit
Function You can select one of the following functions:
● Synchronizing
● Complete transfer
● Gripping
● Withdrawing
● Machining side
Workpiece machining
● Main spindle in counter-spindle
● Counter-spindle in main spindle
Synchronization function Synchronizes with the counter-spindle in the other channel.
Coordinate
system
● MCS
The park position is specified in the machine coordinate system. Teaching in
the park position and angular offset is only possible in the machine coordinate
system.
● Workpiece coordinate system
The park position is specified in the workpiece coordinate system.
XP Park position of tool in X direction (abs) mm
ZP Park position of tool in Z direction (abs) mm
Complete transfer
function
Gripping
Multi-channel machining
11.2 Multi-channel support
Turning
706 Operating Manual, 06/2019, A5E44903486B AB
To Next Page