Flick horizontally with one finger
● Scroll in lists with many columns
Spread
● Zoom in on graphic contents (e.g. simulation, mold
making view)
Pinch
● Zoom out from graphic contents (e.g. simulation, mold
making view)
Pan with one finger
● Move graphic contents (e.g. simulation, mold making
view)
● Move list contents
Pan with two fingers
● Rotate graphic contents (e.g. simulation, mold making
view)
Tap and hold
● Open input fields to change
● Activate or deactivate edit mode (e.g. current block
display)
Multitouch operation with SINUMERIK Operate
3.3 Finger gestures
Turning
74 Operating Manual, 06/2019, A5E44903486B AB
To Next Page