Parameters
Parameter Description Unit
F Feedrate mm/min
mm/rev
Circle input
● End point + center point
● End point + radius
Direction of rotation
Clockwise direction of rotation
Counter-clockwise direction of rotation
X Target position in the X direction (abs and inc) mm
Z Target position in the Z direction (abs and inc) mm
I Circle center point I (inc) - only if circle input via end point and center point mm
K Circle center point K (inc) - only if circle input via end point and center point
Note:
Incremental dimensions: The sign is also evaluated.
mm
R Radius - only if circle input via end point and radius mm
Working with Manual Machine
16.5 Simple workpiece machining
Turning
866 Operating Manual, 06/2019, A5E44903486B AB
To Next Page
Loading...
